Hampton Medical Center
2301 S. Hampton Rd. Dallas Texas
Parking lot restoration Asphalt Restoration 18,560 sf

Process:
 Mill (pulverize) existing failed asphalt and sub-base to a depth of 10"
 The average size of aggregate at completion of milling = 3/4" or less
 Add Portland cement at a rate of 30 lbs. by weight, mix and add water
 Compact until new base resists settling
 Haul excess materials to approved dump site.
 Finish to below existing grade of 2" for overlay
 Tack coat edges of repair area with SS-1 for adhesion purposes.
 Overlay area with 2" of Texas Highway Department approved Type "D" asphalt
    and compacted to match existing pavement.

Asphalt Overlay 6,865 sf -Plus misc Patching 800 sf
 Thoroughly clean and sweep loose debris from pavement
 Tack coat edges of repair area with SS-1 for adhesion purposes
 Overlay area with Texas Highway Department approved Type "D"
    asphalt compacted to an average thickness of 1 1/2"
 First phase of compacting will be performed with a dual drum vibratory roller
 Second phase of compacting will be done with a pneumatic roller until a
    smooth, tight finish is achieved
 All edges will be feathered to existing pavement, with the exception of areas
    where the pavement adjoins a vertical structure.
 It is understood and agreed to, that the overlay does not change the contour
    of the existing pavement and 100% drainage cannot be guaranteed

SEAL COAT / CRACK FILL / STRIPE
Seal Coat Entire Lot – TWO (2) moves
 Barricade, clean and sweep lot to prepare for seal-coating
 Crack fill with rubberized asphalt crack filler
 All light poles will be wrapped and protected
 Apply first coat 75% Masterseal Asphalt Based pavement Sealer and 25%
    Sealmaster Coal Tar Pavement Sealer, a Sealmaster LV Concentrate
    Pavement Sealer a clay-stabilized asphalt based emulsion fortified
    with coat tar at the rate of 1/8 gallon per square yard
 Allow to dry
 Apply second coat of sealer
 Repaint all paint lines, fire lanes, curbing, H/C logos with
    100% Premium Acrylic Zone Marking Paint for New Sealer ( This paint meets
    or exceeds performance requirements set forth by Texas D.O.T. as well as
    Federal D.O.T. exceeding the life/wear of traditional Alkyd and/or
    Rubber Based Paints )